Write a review
Average User Review
There is no review for this company
| SOIL EQUIPMENT (LAB.TANAH) SOIL EQUIPMENT
Language: SO-110A Hand Bor SO-130A Standard Penetration Test SO-140 Sample Extruder SO-145 Sample Extruder SO-150A Dynamic Cone Penetrometer SO-170 Corps of Engineer Soil Surface Sampler SO-200 Dutch Cone Penetrometer SO-210 Dutch Cone Penetrometer SO-250A Plate Bearing Test Set SO-260 Field CBR Test Set SO-270 Proving Ring Penetrometer SO-280 TVA Penetrometer SO-310 Liquid Limit Test Set SO-311A Liquid Limit Device SO-311B Liquid Limit Device SO-315 Plastic Limit Test Set SO-320 Shrinkle Limit Test Set SO-330A Hydrometer Analysis Test Set SO-338 Mechanical End Over End Shaker SO-339A Vacuum Stand SO-340 Specific Gravity (Heating Method) SO-340A Specific Gravity (Vacuum Method) SO-340B Specific Gravity (Vacuum Method) SO-350 Compaction Test Set SO-360A Laboratory CBR Test Set SO-360B Laboratory CBR Test Set SO-370 Combination Permeameter SO-390A Compaction Permeameter Test Set SO-395A Compaction Permeameter Test Set SO-400 Sand Cone Test Set SO-430 Speedy Moisture Tester SO-450 Moisture Content Test Set SO-500 Unconfined Compression Machine SO-500A Unconfined Compression Machine SO-515 Consolidation Test Set SO-525 Direct Shear Test Set English Indonesia |
|
| SO-110A, Hand Bor | ||
|
HAND BOR (SO-110A)
Drilling for soil sampling preparation. SO-111 Drilling Rod Solid bar, 1mtr length, 1 1/4" dia 10 Pcs SO-112 Iwan Type Auger Welded steel, two radial blades, 4" dia 1 Pc SO-113 Straight Chopping Auger Steel bar, hardened tip, 45 mm width 1 Pc SO-114 T-Piece Welded steel 1 Pc SO-115 Tube Adaptor Machined steel, with 3 clamping bolts 1 Pc SO-116 Turning Rod Machined....
| ||
| SO-130A Standard Penetration Test, ASTM D-1586 AASHTO T-206 | ||
|
SO-130A Standard Penetration Test
ASTM D-1586 AASHTO T-206 For driving a split barrel sampler to obtain a representative soil sample and measure the soil resistance to penetration. SO-131 Split Barrel Sampler Herdened machined steel, 1 3/8" i.d., 18" length 1 Set SO-132 Sampling Rod Steel pipe, 1.5 m length 20 Pcs SO-133 Drive Weight Assembly Consist of SO-133.1 Hammer Steel,....
| ||
| SO-140 Sample Extruder | ||
|
SO-140 Sample Extruder
For extruding soil speciment from 68 mm sampling tube, welded steel, screw type. Supplied without sampling tube. Also required, but not part of this set: GE-380 Sample Can GE-840 Wire Saw Dimension (l x w x h): 125 x 15 x 25 cm Gross Weight: 45 kg
| ||
| SO-150A, Dynamic Cone Penetrometer | ||
|
SO-150 A, DYNAMIC CONE PENETROMETER
For rapid determination of field CBR value (rapid quality control). SO-151 Handle Stainless steel 1 Pc SO-152 Hammer Machined steel, Painted, 8 kg weight 1 Pc SO-153 Guide Rod Stainless steel, 16 mm dia drop height 575 mm 1 Pc SO-154 Anvil Machined steel, welded, painted 1 Pc SO-155A Penetration Rod Stainless steel, 16 mm dia, 75 cm effective length....
| ||
| SO-200 / 210, Dutch Cone Penetrometer (Sondir) | ||
|
SO-200 / 210 DUTCH CONE PENETROMETER
ASTM D-3441 For determining cone resistance and friction resistance of soil layers. SO-201 Press-in Apparatus Steel construction, manually operated 2,5 / (5ton) tons capacity 1 Set SO-202A Sounding Rod Machined steel, 36 mm o.d., 1 mtr effective length, tappered thread 20 Pcs SO-203 Plunger Rod Round bar, 15 mm dia, 1 mtr length 20 Pcs SO-204....
| ||
| SO-250 PLATE BEARING TEST SET | ||
|
SO-250 PLATE BEARING TEST SET
ASTM D-1194 AASHTO T-235 For determining ultimate bearing capacity of soil on place by means of field loading test. SO-251A Hydraulic Jack 50 tons capacity, manometer read out, hand operated. Consist of : SO-251.2 Manometer 6" dia., 50 tons capacity, 0.5 tons increament 1 Pc GE-682 Hidraulic Cylinder 50 tons capacity 1 Pc GE-691 Hidraulic Hand Pump....
| ||
| SO-260, Field CBR Test set / CBR Lapangan, ASTM D-4429. | ||
|
SO-260, FIELD CBR TEST SET
ASTM D-4429 For determining CBR value on place. SO-261 Mechanical Jack "Cast alumunium housing, 5 tons cap, hand operated, 2 speeds." Consist of : SO-261.1 Mechanical Jack 1 Pc 5 tons capacity SO-261.2 Swivel Hand 1 Pc Cast alumunium SO-262 Field Penetration Piston Machined steel, galvanized, adjustable height Consist of : SO-262.1 Penetration Piston 1 Pc....
| ||
| SO-270 Proving Ring Penemometer | ||
|
SO-270 Proving Ring Penetometer
For determining penetration resistance of soil layers. SO-271 Penetration Rod Round bar, 3/4" dia., 51.5 cm/49 cm length with 5 cm increment lines. 2 Pcs SO-272 Penetration Cone Machined steel, hardened, plated, 1 sq. in cross section area, 30oangle 2 Pcs SO-273 Holder Alumunium handle 1 Pc SO-274 Carrying Case Wooden case 1 Pc GE-101.1 Proving....
| ||
| SO-280 TVA Penemometer | ||
|
SO-280 TVA Penemometer
Widely used in analyzing soil surface. SO-281 Penetration Rod and Chamber Steel pipe, 65 cm length with hydraulic chamber Consist of : SO-281.1 Penetration Rod Round bar, 40 cm length 2 Pcs SO-281.2 Hiydraulic Chamber Machine steel, 100 kg cap. 1 Pc SO-282 Penetration Needle Machine steel, hardened, tip 0.5, 1.0, 2.0, 3.0, sq. cm. Cross section area 1 Set....
| ||
| SO-310 Liquid Limit Test Set, ASTM D-4318 AASHTO T-89 | ||
|
Liquid Limit Test Set
ASTM D-4318 AASHTO T-89 For determining liquit limit of soil sample. SO-311 Liquid Limit Device Hand operated, brass cup, hard rubber base 1 Set SO-312 ASTM Grooving Tool Machined steel, head gauge 1 Pc SO-313 Cassagrande Grooving Tool Brass plate 1 Pc GE-390 Thin Box Alumunium, 60 gr capacity 12 Pcs GE-396 Glass Plate Galss, 10 mm thick, 30 x 30 cm 1 Pc....
| ||
| SO-320 Shrinkle Limit Test, ASTM D-427 AASHTO T-92 | ||
|
SO-320 Shrinkle Limit Test
ASTM D-427 AASHTO T-92 For determining shrinkage limit of soil sample. SO-321 Prong Plate 1.6 mm thick hard plastic, 76.2 mm square, 3 stainless steel needles, 0.8 mm dia., 3.2 mm height 1 Pc SO-322 Monel Shrinkage Dish Flat bottom, 44,4 mm i.d., 12.7 mm height 1 Pc SO-323 Cristalizing Dish Glass made Consist of : SO-323.1 Dish Glass, 57.2 mm i.d., 12,7....
| ||
| SO-330A, Hydrometer Analysis Test Set, ASTM D-422 AASHTO T-88 | ||
|
Hydrometer Analysis Test Set
ASTM D-422 AASHTO T-88 For determining grain size distribution of fine soil sample. SO-331 Hydrometer A (152 H) Glass, stream line, range 0-60 gr soil/ltr 1 Pc SO-332 Hydrometer B (151 H) Glass, stream line, range 0.995-1.038 1 Pc SO-333 Mechanical Stirer Electric, 220 V, cast alumunium frame, 10.000 rpm 1 Pc SO-334 Dispersion Cup Stainless steel cup....
| ||
| SO-338 Mechanical End Over End Shaker, BS-1377 | ||
|
SO-338 Mechanical End Over End Shaker
BS-1377 Electric, 220 V/ 50 Hz, 1 Phase, 50 RPM. Supplied complete with 2 glass jar 1000 ml and rubber bungs Dimension (l x w x h) : 40 x 60 x 60 cm Gross Weight : 30 kg
| ||
| SO-339A Vacuum Stand | ||
|
SO-339A Vacuum Stand
To facilitate evacuation of air from soil/fine aggregate in flask. Welded steel frame, vacuum valve, adjustable platen height, provided with vacuum gauge, 6 flasks capacity. Supplied complete with vacuum pump and flasks
| ||
| SO-340A Specific Gravity (Vacuum Method), ASTM D-854 AASHTO T-100 | ||
|
SO-340A Specific Gravity (Vacuum Method)
ASTM D-854 AASHTO T-100 For determining specific gravity of soil sample. SO-341 Vacuum Stand Wooden base, steel pipe column, 2 valves 1 Set GE-363 Mixing Bowl Stainless steel, 250 mm dia. 1 Pc GE-404 Graduated Cylinder 500 ml capacity 1 Pc GE-412A Volumetric Flask 500 ml capacity, vacuum 2 Pcs GE-473 Funnel Glass, wide mouth 1 Pc GE-521....
| ||
| SO-360B LABORATORY CBR TEST SET | ||
|
SO-360B LABORATORY CBR TEST SET
ASTM D-1883, AASHTO T-193 For determining the bearing ratio of soil. SO-361B Mechanical Loading Machine Steel frame, hand operated, two speeds, 10.000 lbs cap., 1.954" piston dia. 1 Set SO-362 CBR Mold Machined steel, 6" i.d, 7" weight, 2" height of collar 3 Pcs SO-363 Spacer Dish Machined steel, 5 15/16" dia., 2.416" height 1 Pc SO-364 Cutting Edge....
| ||
| SO-370 Combination Permeameter, ASTM D-2434 AASHTO T-215 | ||
|
SO-370 Combination Permeameter
ASTM D-2434 AASHTO T-215 For determining coefficient of permeability of soil sample. SO-371 Sample Chamber Transparent fibre glass, 2 1/2" i.d., 8" height, compessive spring, cast alumuniium body 1 Set SO-372 Funnel Plastic, wide mouth, with over flow 1 Pc SO-373 Frame Alumunium 1 Pc SO-374 Porous Stone 2.47" dia., 1/2" thick 2 Pcs GE-376 Burette ....
| ||
| SO-395 A Compaction Permeameter Test Set | ||
|
SO-395 A Compaction Permeameter Test Set
For determining coefficient of permeability of compacted soil sample. SO-395 Compaction Permeameter 1/13.33 cu. ft. mold, 6" i.d., inlet-outlet connector, overflow valve, porous stone 1 Set SO-391 Frame Cast alumunium base, alumunium column, 3 burette (5, 10, 15 mm diameter) 1 Set GE-402 Graduated Cylinder 100 ml capacity 1 Pc GE-700 Stop....
| ||
| SO-400, Sand Cone Test Set, ASTM D-1556. | ||
|
SO-400, SAND CONE TEST SET
ASTM D-1556, AASHTO T-191 For determining the density of compacted soil in place. SO-401 Sand Cone Bottle Plastic, 4 ltr cap. approx. 1 Pc SO-402 Sand Cone Funnel Seamless metal, turning stoper, 6 1/2" dia. bottom, 1/2" neck dia. 1 Pc SO-403 Base Plate Cast alumunium, 12" x 12" 1 Pc SO-404 Graduated Sand Uncemented sand, passing # 10, retained # 60, 25 kg....
| ||
| SO-430, Speedy Moisture Content Test Set | ||
|
SO-430, SPEEDY MOISTURE TESTER
AASHTO T-217 For determining the moisture content of soil by means of calcium carbide gas pressure meter. SO-432 Speedy Gauge M/C range 0-20 %, sens.: 0.2%, smple weight 20 gr 1 Pc SO-434 Brass beam, Cast alumunikum frame, 10 gr counter balance Seamless metal, turning stoper, 6 1/2" dia. bottom, 1/2" neck dia. 1 Pc SO-435 Calcium Carbide Calcium Carbide 1....
| ||