Products Catalog

Specification

APPLICATIONS
For boiler or furnace flue gas analysis where a continuous oxygen analyzer already exists, but carbon monoxide ( CO) must still be measured.

FEATURES
• Rugged design that is easy to operate and maintain
• Fast warm-up and response
• Disposable, long life electrochemical CO sensor
• Rechargeable battery operation
• Use on flue gas from any fuel
• Dual range: 0-2000 ppm & 0-4.00% CO
• Built-in sample pump, filter and flowmeter
• Continuous condensate removal
• Rapid reading recovery after CO ' overdose'
• Stainless steel probe with sample hose

OPTIONS
• Recorder outputs of 0-1V or 4-20 mA ( can be isolated)
• Stack temperature readout ( 310T)
• Special sampling probes
• Sample pre-cooler
• Suitcase ( K) style cabinet available
• CO alarm with LED
• Detachable/ portable data logger

CALIBRATION
• Air for zero
• Analyzed calibration gas mixture of
PPM CO in nitrogen for span

DESCRIPTION
The Nova 310 Series Portable Flue Gas CO Analyzer utilizes a reliable, customer-replaceable electrochemical
sensor which responds quickly to the CO present in the flue gas sample. Its life expectancy is between 3 and 4
years.
In operation, a built-in sample pump draws in the flue gas sample through the S.S. probe, 12 ft sample hose,
condensate removal filter, secondary filter and flow meter then on to the CO detector. The detected CO is
displayed on an LCD digital meter which has a switchable backlight for use in dark areas. A dual range switch
allows either the 0-2000 PPM or the 0-4.00% range to be displayed.
A rechargeable battery provides enough power to the pump and electronics for about 20 hours of continuous operation. The analyzer can still be operated while it is being charged. A red LED light on the front panel indicates when to recharge. A green LED light indicates when the charge is complete. The analyzer is supplied with a 12 ft. ( 4 m) sample hose and S.S. probe.

SPECIFICATIONS
Method of Detection: Customer-replaceable electrochemical CO sensor
Ranges Available: 0-2000 PPM and 0-4.00% CO - switch selectable ( other ranges available)
Resolution: 1 PPM in PPM range; 0.01% CO in % range
Accuracy and Repeatability: Better than 1% of full scale, based on a 0-2000 PPM range
Drift: Less than 1% full scale per day
Response Time ( T-90) : 20-30 seconds
Ambient Temperature Range: 0-50° C ( 32° to 122° F)
Linearity: Better than 1% of full scale
Size and Weight: WP style - approx. 11½ " L x 8" W x 7¼ " H @ 8 lbs ( 29 x 20 x 18 cm @ 3.6 kg)
K style - approx. 14" L x 10½ " W x 6" H @ 12 lbs ( 36 x 27 x 15 cm @ 5.5 kg)
Power: 115VAC and rechargeable battery operation, recharger included. ( 220 VAC available)
Output Options: Optionally available 4-20 mA or 0-1 VDC
Alarms: High or low CO alarm with LED ( optional)