Description :
Designed for the contractor, the CPS 2.12 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50 Hz high-pass filter. Like the CPS multi-channel amplifiers, the CPS 2.12 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.
Features :
Up to 2 x 2400 W into 2 ohms
Phoenix-type input and output connections
Remote power-on/ off contact
Rear-mounted attenuators
Programmable time for custom power-on delay settings
Module slot for optional RCM-810 card, allowing IRIS-Nett control and monitoring
Switchable 50 Hz high-pass filter
Three-stage front-to-rear fans
Class-H design
Complete protection package
Specifications :
Amplifier Gain 32 dB
Analog Inputs 2, electronically balanced, Phoenix-type
Audio Network No
CAN Bus Interface Optional ( RCM-810 card)
Continuous Rated Power ( 1 kHz, THD 1% ) 2& 1800 Watts
Continuous Rated Power ( 1 kHz, THD 1% ) 4& 1200 Watts
Continuous Rated Power ( 1 kHz, THD 1% ) 8& 750 Watts
Continuous Rated Power ( 20-20 kHz, THD< 0, 2% ) 4& 1100 Watts
Continuous Rated Power ( 20-20 kHz, THD< 0, 2% ) 8& 550 Watts
Cooling Front-to-Rear, 3-stage-fans
Crossover Type Modular
DIM 30 0.05 %
Electronics Type Amplifier
Frequency Response 10 Hz - 40 kHz ± 1 dB
Impedance 2/ 4/ 8 &
Input Impedance ( Balanced) 20 k©
Input Sensitivity + 6.6 dBu ( 1.66 Vrms)
Intermodulation Distortion ( SMPTE) 0.1 %
Mains Voltage 240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz ( factory configured)
Maximum Bridged Output 4& 3600 Watts
Maximum Bridged Output 8& 2400 Watts
Maximum Input Voltage + 21 dBu ( 8.69 Vrms)
Network Control ( IRIS-Net) Optional ( RCM-810 card)
Slew Rate 30 V/ µ s
Topology Class-H
Total Harmonic Distortion 0.03 %
Variable Load Drive ( VLD) No
Height 2RU 88.1 mm ( 3.47" )
Width 482.6 mm ( 19" )
Depth 421.5 mm ( 16.59" )
Weight Net 7 kg ( 15.43 lbs)