Melodia Jakarta Divisi Rental Sound system & Lighting
Indonesia |
|
| | |
|
| Products Catalog: alat musik drums |
(Product Photo) |
| Payment Method: | Cashier Order |
| Specification: | Shells
The shells of Phoenix are 11-ply hybrid shells. The woods used are progressively harder from the center ply to the outer plies. The center ply is jatoba; this is a very hard wood’ and it “ anchors” the fundamental of the shell. Sandwiched on either side of this is kapur. This wood is in the mahogany family and adds warmth to the sound of the drum. The inner and outer plies are maple, except in the case of drums using the optional burled ash outer ply. These drums use an outer half-ply each of maple and burled ash. Maple rounds out the tone adding high and mid frequencies to the shell.
Bearing edges
All drums have a 30° bearing edge, but each “ family” of drums uses a different profile. Bass drums have a sharper edge cut toward the outer plies. This gives the bass drums attack and shortens the decay. Floor toms have a slightly rounded edge to give them a perfect balance of attack and sustain, making them very articulate at all dynamic levels. Toms have an even more rounded profile for warmth and sustain. This combination of shell composition and bearing edges makes Phoenix what many of our artists described as “ the most musical drums [ they] have ever played” .
Hardware
Phoenix uses redesigned versions of the Nouveau lug and YESS. The new lug mounts on a square hook rather than a round post. This keeps the tension rod in perfect vertical alignment and eliminates the need to use two hands while tuning the drum. We used the aluminum die-cast hoops made popular on our Absolute series for Phoenix. These hoops are very light but rigid, giving you the open, warm sound of a triple-flanged hoop and the accurate tuning of a die-cast hoop. Lugs and hoops are available in chrome or gold.
The new version of the YESS mounting system supports the drum at the top and bottom. The new version mounts the tom bracket onto a piece of the shell, and that wooden plate is isolated or shock-mounted using rubber grommets. A 3-piece fastening system is used to attach the new YESS to the shell, and the inside and outside fasteners do not touch. This system totally isolates the drum and allows the full tone to come through and maximizes sustain.
Finishes
PHX is available with either maple and burled ash exterior plies, and with gold or chrome hardware. The finishes available on the maple outer ply are: Matte Natural, Matte Black, Polar White, and Cherry Sunburst. The finishes available on the burled ash are Garnet Fade, Sapphire Fade, Turquoise Fade, Textured Amber Sunburst, and Textured Black Sunburst.
Specifications
Size ( diameter x depth)
Bass Drums 18" X 14"
PHX-1814
20" x 16"
PHX-2016 22" x 16"
PHX-2216 24" x 16"
PHX-2416
20" x 16"
PHX-2016R ( no mount) 22" x 16"
PHX-2216R ( no mount) 24" x 16"
PHX-2416R ( no mount)
20" X 18"
PHX-2018 22" X 18"
PHX-2218 24" X 18"
PHX-2418
22" X 18"
PHX-2216R ( no mount) 24" X 18"
PHX-2418R ( no mount)
Mounted Toms 8" x 7"
PHXT-0807 10" x 8"
PHXT-0808 10" x 7"
PHXT-1007 10" x 8"
PHXT-1008
12" x 8"
PHXT-1208 12" x 9"
PHXT-1209 13" x 9"
PHXT-1309 13" x 10"
PHXT-1310
14" x 11"
PHXT-1411 14" x 11"
PHXT-1412 16" x 13"
PHXT-1613 16" x 14"
PHXT-1614
Floor Toms 14" x 13"
PHXF-1413 16" x 15"
PHXF-1615 18" x 16"
PHXF-1816
Shells: 11-ply hybrid jatoba, kapur, maple, and/ or burled ash
Lugs: New design Nouveau detachable, chrome or gold finish
Mounts: New design YESS
Hoops: Aluminum die-cast, chrome or gold finish
Bearing Edges: 30° , varied profiles
PHX Phoenix Components
Maple Outer Ply is available in: Matte Natural, Matte Black, Polar White, and Cherry Sunburst.
Burled Ash is available in: Garnet Fade, Sapphire Fade, Turquoise Fade, Textured Amber Sunburst, and Textured Black Sunburst.
Bass Drums
PHXB-1814 18" x 14"
PHXB-2016 20" x 14"
PHXB-2018 20" x 18"
PHXB-2216 22" x 16"
PHXB-2218 22" x 18"
PHXB-2416 24" x 16"
PHXB-2418 24" x 18"
PHXB-2016R 20" x 16" no mount
PHXB-2216R 22" x 16" no mount
PHXB-2218R 22" x 18" no mount
PHXB-2416R 24" x 16" no mount
PHXB-2418R 24" x 18" no mount
Toms
PHXT-0807 8" x 7"
PHXT-0808 8" x 8"
PHXT-1007 10" x 7"
PHXT-1208 12" x 8"
PHXT-1209 12" x 9"
PHXT-1309 13" x 9"
PHXT-1310 13" x 10"
PHXT-1411 14" x 11"
PHXT-1412 14" x 12"
PHXT-1613 16" x 13"
PHXT-1614 16" x 14"
Floor Toms
PHXF-1413 14" x 13"
PHXF-1615 16" x 15"
PHXF-1816 18" x 16"
RM-CJW
Interchangeable Wedges Ideal for Latin and Hip-Hop.
More Info
RM-CW
Interchangeable Wedges Ideal for Latin and Hip-Hop.
More Info
RM-GW
Interchangeable Wedges Ideal for Latin and Hip-Hop.
More Info
RM-JW
Interchangeable Wedges Ideal for Latin and Hip-Hop.
More Info
Subkick
Yamaha Drum artist Russ Miller had the idea of taking old studio technology and packaging it in a unit that can be used in the studio or on the road. The SKRM-100 Subkick is a low-frequency capture device that picks up the low frequencies ( 100Hz-2000Hz) that a normal microphone can' t. When used in conjunction with a normal internal microphone ( for the attack) , your kick drum has a jaw-dropping bottom end like you' ve never heard before. |
Your inquiry will be recorded in "Member Trade Mail". |
Recommend to your friends |
|
|
)