| Specification: | Push rod sintering furnace is a continuous equipment tailored to PM industry mainly for the sintering of PM parts. It consists of furnace body, boat pushing system and temperature control system. Furnace body is divided into several independent heating zones, in which heating elements are distributed at the top and bottom of the furnace body in a drawer style to ensure convenient installment and maintenance. Every sector has its independent temperature control system including thermal couples, intellectual digital PID adjustor and SCR to ensure precise control of temperature.
-------------------------------------------------------------- ------------------
Main specifications and accessories
Specifications and types: DL-SF200/ DL-SF300/ DL-SF450
Highest temperature( C) : 1250( depending on furnace body material and heating elements)
Rated working temperature( C) : 1150 ( depending on furnace body material and heating elements)
Dimension of heating zone( mm) ( width, height, length) :
200* 140* 4500, L3= 4500/ 320* 150* 7500, L1= 1400, L2= 2500, L3= 3600/ 485* 125* 7 500, L1= 1400, L2= 2500, L3= 3600
Number of heating zones: 4/ 5/ 6
Gas consumption ( Nm3/ h) : 10/ 15/ 20
Rated heating power( kw) : 60/ 125/ 150
Rated voltage( V) : 380
Boat moving mode: motor driven or hydraulic driven
Furnace body material: Corundum or SiC/ SUS310S/ Si3N4 enforced SiC
Configure dimension ( mm) ( width, height, length) : 1200* 1500* 11000/ 1400* 1600* 14500/ 1500* 1600* 18000
Above-mentioned standard outfits are subject to change according to customers' demand.
Optional:
1 automatic control of working condition shifts by PLC
2 dew-point determining device
3 gas volume of flow determining system
Equipments and spare parts fabricated by our company: Reduction furnaces, Belt furnaces, revolving tube calcinations furnaces, High temperature furnaces, De-binder furnaces, Vacuum sintering furnaces, Vacuum dryers, Ammonia dissociating system, PSA nitrogen producer, Gas purifier, Water, gas or vacuum atomization system, High temperature resistant steel mesh and furnace tubes.
Metal powders include powders of pure Cu, Cu-Sn alloy, Cu-Zn, Cu alloy with higher Pb or Sn content, 6-6-3 bronze, Cobalt, Ti, Sn, Ni, Fe-Co Fe-Cu, spheroidal cast tungsten carbide and other metals. |
)
